Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter

Product Details
Customization: Available
Communication Mode: Full-Duplex & Half-Duplex
Type: Sas Card
Gold Member Since 2024

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (21)
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
  • Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
Find Similar Products
  • Overview
  • Product Parameters
  • Detailed Photos
Overview

Basic Info.

Model NO.
9311-8i
Transmission Rate
12GB/S
Ports
≦8
Transport Package
Carton Packing
Trademark
Broadcom
Origin
Malaysia
Production Capacity
2000 Piece/Pieces Per Day

Product Description

Product Parameters

 

WINDOWS DRIVER INSTALLATION
Use the LSI_SAS3.SYS driver for the Windows XP x64, Windows Server®
2003 (x86, x64, or A64),
Windows Server 2008 (x86, x64, or IA64), Windows Server 2012, Windows Vista®
(x86 or x64), Windows 7,
or Windows Server 2008 R2 operating systems (OSs). LSI does not support the Windows XP x86 server.
Refer to the Windows ReadMe.txt file on the LSI 12Gb/s SAS+SATA Drivers and Documentation CD for
driver installation directions for your particular OS version.
LINUX DRIVER INSTALLATION
Refer to the Linux ReadMe.txt file on the LSI 12Gb/s SAS+SATA Drivers and Documentation CD. LSI
provides open source drivers that you can implement in the following ways:
• Adding precompiled binaries to an existing installation using driver update disks or RPM software
packages for selected distributions.
• Adding or updating the Fusion-MPT™ source in the Linux kernel for any distribution.
 
Product Name SAS card
Warranty 1 Years
Storage Temp / Humidity -40 to 85ºC
Products Status Brand-new
Output 12-36V
1. Unpack the HBA, and inspect it for damage. Remove the HBA from the antistatic bag, and carefully inspect the device for damage. If you notice any 
damage, contact LSI or your reseller support representative.
 
2. Prepare the computer. Turn off the computer, and disconnect the power cord from the rear of the 
power supply.
3. Remove the cover from the chassis.  
4. Check the mounting bracket on the HBA (system-dependent).  If required for your system, 
replace the full-height mounting bracket that ships on the HBA with the low-profile bracket supplied. 
Complete step a through step d to attach the short bracket.
 
5. Insert the HBA into an available PCIe®
 slot. 
 Locate an empty x8 PCIe slot. Remove the blank 
bracket panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if 
applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the 
slot. The following figure shows how to insert the HBA into a PCIe slot.
 
Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
Detailed Photos

 

Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus AdapterOriginal Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus AdapterOriginal Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
Original Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus AdapterOriginal Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus AdapterOriginal Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus AdapterOriginal Sas Card 9311-8I PCI Express 12GB/S Sas Host Bus Adapter
 
 
 
 
 
 
 
 
 
 
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier