Megaraid 9540-8I RAID Controller 12GB/S Pcie Support Sas/SATA/Nvme RAID

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Controllers
• Model NO.: 9540-8i
• Transmission Rate: 12GB/S
• Ports: ≦8
• Transport Package: Carton Packing
• Trademark: Broadcom
• Origin: Malaysia
• Production Capacity: 2000 Piece/Pieces Per Day

Product Description

Product Parameters

Key Features
• Tri-Mode Storage Interface
− 12Gb/s SAS
− 6Gb/s SATA
− Gen 4.0 PCIe (NVMe)
• Hardware Secure Boot
• Universal Backplane Management 
(UBM) ready
• RAID levels 0, 00, 1, 5, 6, 10, 50, 
and 60 
− 13,700 MB/s (RAID 256K Seq Rd)
− 3M IOPs (4K RAID RR)
− 240K RAID 5 IOPs (4K RW)
• MegaRAID SafeStore™ Software for 
SED Key Management
• CacheVault™ flash backup
• x8 PCIe Gen 4.0 Host Interface
− Supports x8, x4, x2, x1 PCIe lanes 
at a transfer rate up to 16.0GT/s per 
lane, full duplex
− Lane and polarity reversal 
• SFF-9402 Compliant Connector 
Pinout 
• Up to 240 SAS/SATA devices
• Up to 32 NVMe devices
• Form Factor Friendly Cable Exit
Note: Not all features are applicable 
to the 9540. See the support matrix 
for details.

 

Product Name	Controllers
Warranty	1 Years
Storage Temp / Humidity	-40 to 85ºC
Products Status	Brand-new
Output	12-36V
1. Unpack the HBA, and inspect it for damage.	Remove the HBA from the antistatic bag, and carefully inspect the device for damage. If you notice any  damage, contact LSI or your reseller support representative.
2. Prepare the computer.	Turn off the computer, and disconnect the power cord from the rear of the  power supply.
3. Remove the cover from the chassis.
4. Check the mounting bracket on the HBA (system-dependent).	If required for your system,  replace the full-height mounting bracket that ships on the HBA with the low-profile bracket supplied.  Complete step a through step d to attach the short bracket.
5. Insert the HBA into an available PCIe®  slot.	Locate an empty x8 PCIe slot. Remove the blank  bracket panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if  applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the  slot. The following figure shows how to insert the HBA into a PCIe slot.

Detailed Photos