Original 9361-8I (2G) Sas3108 Megaraid Sas PCI-Express 3.0 Sas Controller

• Customization: Available
• Communication Mode: Full-Duplex & Half-Duplex
• Type: Controller
• Model NO.: 9361-8I 2g
• Transmission Rate: 12GB/S
• Ports: ≦8
• Transport Package: Carton Packing
• Trademark: Broadcom
• Origin: Malaysia
• Production Capacity: 2000 Piece/Pieces Per Day

Product Description

Product Parameters

Key Features
• High-performance 12 Gb/s data 
transfer rates
• Eight internal 12 Gb/s SATA+SAS 
ports
• Two mini-SAS SFF8643 internal 
connectors (horizontal mount)
• SAS3108: 1.2 GHz PowerPC 476 
dual-core 12 Gb/s ROC
• PCI Express 3.0 host interface
• Cache memory options:
− 1 GB 1866 MHz DDR3 SDRAM
− 2 GB 1866 MHz DDR3 SDRAM
• RAID levels 0, 1, 5, 6, 10, 50, and 60
• Support for CacheVault flash cache 
protection
Key Advantages
• 12 Gb/s solutions accelerate 
performance for next-generation 
data centers, web, and cloud
• Delivers enterprise-class data 
protection and security
• Preserves investment in 6 Gb/s and 
3 Gb/s drives
• Support for Advanced Software 
options
• Connect up to 128 3 Gb/s, 6 Gb/s, 
or 12 Gb/s SATA and SAS devices

 

Product Name	Controller
Warranty	1 Years
Storage Temp / Humidity	-40 to 85ºC
Products Status	Brand-new
Output	12-36V
1. Unpack the HBA, and inspect it for damage.	Remove the HBA from the antistatic bag, and carefully inspect the device for damage. If you notice any  damage, contact LSI or your reseller support representative.
2. Prepare the computer.	Turn off the computer, and disconnect the power cord from the rear of the  power supply.
3. Remove the cover from the chassis.
4. Check the mounting bracket on the HBA (system-dependent).	If required for your system,  replace the full-height mounting bracket that ships on the HBA with the low-profile bracket supplied.  Complete step a through step d to attach the short bracket.
5. Insert the HBA into an available PCIe®  slot.	Locate an empty x8 PCIe slot. Remove the blank  bracket panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if  applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the  slot. The following figure shows how to insert the HBA into a PCIe slot.

Detailed Photos